Electrical jobs are quite tricky and resolving these tasks needs great precision and care. Otherwise, mistakes are likely to take place and that can lead to accidents. At the time of the switchboard installation, all the relevant drawbacks must be avoided. The mistakes that need to be taken care of while setting up a switchboard or other electrical installation are as mentioned below:
• Mistake - The exposed wires especially when these come in contact with another exposed wire or metal, can cause shortcircuit that can lead to severe accidents.
Way out - As a solution, reconnect the wire and wrap the wire around the terminal for a safe switchboard installation.
•Mistake - At the time of installing a switchboard, you can get rusted or scratched parts in wires. Reject these wires and these can cause overheating.
Way out – Cut those damaged parts and strip the cable again before you reconnect it. Remember, there might be certain times when your existing switchboard might need to be replaced. At that point, switchboard replacement is required.
•Mistake - loose cables hanging from the walls, ceilings, are simply dangerous.
Way out – The loose cables should be fixed well with the plastic clips.
•Mistake – Hidden electrical or junction boxes is another mistake. According to the experts, these boxes should be visible so that problems or any system failure should be accessible easily. Also, this will make repair and renovation easy and less expensive.
Way out – the boxes should be easily accessible (though at distances as suggested by the regulation board)
•Mistake – Choosing the wrong circuit breaker is another mistake. These devices are basically used to protect the equipment and people if short circuit or overload takes place. Well, the mistake takes place especially due to the misunderstanding of new laws and regulations of the national board.
Way out – The solution is to stay updated and if any problem arises, talk to an inspector or consider hiring professional electricians.
•Mistake – Though the electrical tapes can get you a temporary solution, this is not a good idea as a permanent solution. This will weaken with the passing time and can promote accidents.
Solutions – Use wire connections always and these are available in various forms.
Get the best electrical service from them
Looking for a trusted electrician in Auckland? For safe and effective switchboard installation in Auckland, contact Ripple Electrical. Visit rippleelectrical.co.nz to contact them or to learn more about them.
• Mistake - The exposed wires especially when these come in contact with another exposed wire or metal, can cause shortcircuit that can lead to severe accidents.
Way out - As a solution, reconnect the wire and wrap the wire around the terminal for a safe switchboard installation.
•Mistake - At the time of installing a switchboard, you can get rusted or scratched parts in wires. Reject these wires and these can cause overheating.
Way out – Cut those damaged parts and strip the cable again before you reconnect it. Remember, there might be certain times when your existing switchboard might need to be replaced. At that point, switchboard replacement is required.
•Mistake - loose cables hanging from the walls, ceilings, are simply dangerous.
Way out – The loose cables should be fixed well with the plastic clips.
•Mistake – Hidden electrical or junction boxes is another mistake. According to the experts, these boxes should be visible so that problems or any system failure should be accessible easily. Also, this will make repair and renovation easy and less expensive.
Way out – the boxes should be easily accessible (though at distances as suggested by the regulation board)
•Mistake – Choosing the wrong circuit breaker is another mistake. These devices are basically used to protect the equipment and people if short circuit or overload takes place. Well, the mistake takes place especially due to the misunderstanding of new laws and regulations of the national board.
Way out – The solution is to stay updated and if any problem arises, talk to an inspector or consider hiring professional electricians.
•Mistake – Though the electrical tapes can get you a temporary solution, this is not a good idea as a permanent solution. This will weaken with the passing time and can promote accidents.
Solutions – Use wire connections always and these are available in various forms.
Get the best electrical service from them
Looking for a trusted electrician in Auckland? For safe and effective switchboard installation in Auckland, contact Ripple Electrical. Visit rippleelectrical.co.nz to contact them or to learn more about them.
Comments
Post a Comment